JFX200-2513

Specifications

JFX200-2513
Head		On-demand Piezo head (Array of 2 heads stagger)
Print resolution		300, 450, 600, 900, 1,200dpi
Ink	Type	UV curable ink : LUS-120 (C, M, Y, K, W, Cl)
		UV curable ink : LUS-150 (C, M, Y, K, Lc, Lm, W)
		UV curable ink : LUS-200 (C, M, Y, K, W)
		UV curable ink : LUS-350 (C, M, Y, K, W, Cl)
		UV curable ink : LH-100 (C, M, Y, K, W, Cl)
		Primer: PR-100, PR-200
	Ink Supply system	Supplied from 1-liter bottles for each color
	Ink circulation system *1	White ink circulation using Mimaki Circulation Technology (MCT)
Maximum diagram dimensions (W×D)		2,500×1,300 mm (98.4×51.2")
Media	Dimensions (W×D)	2,500×1,300 mm (98.4×51.2")
	Height	Max. 50 mm (2.0")
	Weight	Less than 50 kg/m2 (110.2 lb./ft2), non concentrated load
Media absorption		Absorption fixed through use of a vacuum
	Number of absorption area partitions	2 partitions (X-axis direction)
Range accuracy	Absolute accuracy	± 0.3 mm (0.01") or ± 0.3% of the specified range, whichever is larger
	Reproducibility	± 0.2 mm (0.008") or ± 0.1% of the specified range, whichever is larger
UV device		LED-UV system
	Standard service life *2	Over 5,000 hours
Interface		USB2.0
Safety standard		VCCI class A, CE Marking, CB Report, UL (U.S. safety organization), RoHS directive, UL 60950-1, FCC class A
Input power supply		Single phase, 200 V AC-240 V AC, 50 Hz/60 Hz, less than 12 A
Power consumption		Less than 2.88 kVA
Installation environment	Temperature	15 – 30 °C (59 – 86 °F)
	Relative humidity	35 – 65 %Rh
	Accuracy maintained temperature	18 – 25 °C (64.4 – 77 °F)
	Temperature gradient	Less than ± 10 °C/h (± 18 °F/h)
	Dust	Similar to standard office environments
Install Dimensions (W×D×H)		4,400×2,250×1,250 mm (173.2×88.5×49.2")
Assembled Dimensions (W×D×H)		4,400×2,450×1,250 mm (173.2×96.4×49.2")
Weight		650 kg (1,433 lbs.)

*1 MCT works only with white ink. *2 The standard service life times listed are estimates and do not guarantee the operation. ・Inks would not be cured when printing speed is faster than that of draft mode.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

 

---

Precautions for UV printing

 Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

   Safety notice: You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.